Door Painters in Sheffield
Sheffield Decorators are door painters covering the south and west suburbs of Sheffield, including Nether Edge, Ecclesall, Broomhill, Greystones, Ranmoor, Fulwood, Dore, Banner Cross, Crookes, Chapeltown, Hillsborough, and Gleadless. Part of our interior painting service.
- Interior door repaints in gloss, satin, and eggshell finishes
- Panel door stripping and preparation on original Victorian timber
- Door frames and architraves finished to match
- Fire door repaints to manufacturer requirements
- Fixed-price quotes with no additions on completion
Ranmoor Victorian detached properties commonly have original solid timber doors, four or six-panel, that have been painted many times over decades. A proper job means stripping or sanding back to a sound base before priming. We work through these properties methodically, door by door, without taking shortcuts on preparation.
Call 0114 697 7077 today for a free quote.
Why Choose Sheffield Decorators
Woodwork Specialists
Doors, frames, and joinery finished with a smooth, lasting coat.
Clear Pricing
Fixed price from the first quote with no unexpected additions.
Fully Insured
Full public liability cover on every job we undertake.
Highly Recommended
Sheffield Decorators comes recommended by repeat clients and local referrals.
Get My Free Quote
Speak to a Sheffield door painter today
Door Painting Services in Sheffield
Interior Flush Doors
Flush doors are the most common interior door in post-war and mid-century properties. In Gleadless and Chapeltown, where post-war builds are common, flush doors in reasonable condition can usually be repainted in satin or eggshell without major preparation.
Where flush doors have been painted heavily, the edges can build up a thick skin that causes the door to stick in its frame. Edges are sanded back as part of the preparation on any door showing this issue.
Panelled Doors
Original panelled doors in Victorian and Edwardian properties require a different approach. The panels, rails, and stiles expand and contract at different rates, and a coat that is too thick or inflexible cracks at the panel margins within months.
Doors are sanded or stripped back to a sound surface, a flexible primer applied, and a finish coat used that can move with the timber. Large Victorian detached properties in Ranmoor typically have six to eight internal doors of this type. The sequence matters: stiles first, then rails, then panels.
Door Frames and Architraves
Frames and architraves are often in worse condition than the doors themselves. Scuff marks, paint drips from previous jobs, and nail holes are common on older properties. All defects are filled, sanded, and primed before top coats go on.
Matching the sheen level between doors, frames, and architraves matters for a consistent result. For the full interior scope, see our interior painting service. For stripped and restored timber joinery, see our wood painting page.
Fire Doors and Wardrobe Doors
Fire Doors
Fire doors in residential and commercial properties must be repainted carefully. The intumescent strips and seals around the door edge must not be painted over. We check for these components before starting and mask accordingly.
We advise on the correct finish coat for fire door leaf and frame surfaces. Most fire doors use a water-based satin. Oil-based gloss is generally not appropriate on modern fire door sets.
Wardrobe Doors
Built-in wardrobe doors are often the last interior surface to be refreshed. They are usually flush and can be repainted in situ if they open freely and the frame clearances are adequate. Carpet and floor edges are masked before starting to keep the work area tidy.
Where wardrobe doors are sliding, we generally paint them in situ on the track to avoid disturbing the mechanism. On older properties in Ecclesall and Broomhill, some fitted furniture was built on site and the doors are fixed in position.
Here’s How It Works
1. Quote Visit
We count all doors, assess condition, and confirm preparation required per door.
2. Preparation
Doors are sanded, stripped where necessary, filled, and primed before any top coat goes on.
3. Priming
Bare or heavily sanded surfaces receive a primer coat appropriate to the timber and existing finish.
4. Top Coats
Finish coats are applied in the correct sequence. Panel doors follow stile, rail, panel order.
5. Final Check
Each door is checked for coverage, panel definition, and frame clearance before we leave.
Door Painting Costs in Sheffield
Prices below are estimates only. Every project is different. Call 0114 697 7077 for a precise quote.
Door Type and Condition
A flush door in reasonable condition takes an hour or two. A six-panel Victorian door with failing paint and cracked joints takes significantly longer to prepare properly.
Interior door painting in Sheffield typically ranges from around £80 per door for a simple flush door repaint to over £200 per door for original panelled doors requiring full stripping.
Number of Doors
Larger properties in Ranmoor and Fulwood often have eight to twelve interior doors. Volume affects the day rate but individual preparation cannot be rushed.
A flush door repaint in Gleadless or Chapeltown typically costs £80 to £140 per door including frame. A panelled door repaint in Greystones or Banner Cross runs £120 to £200 per door with frame and architrave.
Frame and Architrave Scope
Doors quoted on their own take less time than doors quoted with full frame and architrave preparation. The scope at the quote stage is confirmed.
A full set of internal doors in a Victorian detached property in Ranmoor typically costs £600 to £1,100 for six to eight panelled doors with full preparation. For front door work, see our front door painting page.
Get My Free Quote
Get a free door painting quote in Sheffield
Door Painting FAQs
Get My Free Quote
Fill in the form below for a free quote: